lathe grizzly g1003 jet gear shaft

lathe grizzly g1003 jet gear shaft

  • Grizzly G1003 parts - The Home Shop Machinist Machinist ...

    2008-11-14  The problem with these older (bought in 92) Grizzly G1003 lathes are in order to take the chuck off the threaded head spindal, you throw the unit into back gear and bump the chuck in the counter clockwise direction and if all goes well the chuck loosens up with a couple bumps on a wrench.

  • g1003 m - Grizzly

    Using a 5mm Allen wrench, remove the lower gear on the gearbox drive train (#1 in Figure 2). This gear is keyed to its shaft—be careful not to lose the key when the gear comes off. Removal of the idler gear (#2) and the swing bracket (#3) are next. This will be easier if you treat the gear

  • Lathe - Enco Jet

    Grizzly df-1237 lathe g1003 jet enco low gear cam shaft slow locator device back. This is the slow gear cam shaft and locator device locator bushing and the ends it is in good used condition caomes as shown greasy and i pictured the wear mark on the shaft from years of use where the locator meets the shaft i cleaned it up with a grinder to smooth it out it works fine does not affect the ...

  • GRIZZLY G1003 INSTRUCTION MANUAL Pdf Download ManualsLib

    View and Download Grizzly G1003 instruction manual online. 12'' x 37'' gap-bed metal lathe. G1003 lathe pdf manual download.

  • Jet-vs-Grizzly lathe - The Home Shop Machinist Machinist ...

    Jet vs Grizzly James, I bought a Jet GHB1340A about a year and a half ago. I have been very happy with the machine. About 6 months after purchase, I crashed the lathe and stripped the worm on the feed rod and buggered a shaft in the apron. I called Jet, they sent out the new parts and sent a technician 150 miles to install them, no charge.

  • Are you happy with your Grizzly 12x36 lathe? The Hobby ...

    2020-07-25  Grizzly 12x36 lathe (DF1236G, G1003, etc) metric threading chart Some time back in 2014 I posted an "improved" metric threading chart for this series of lathes (including the 12x24 equivalents). The chart included all but one of the currently used metric threads (couldn't find a way to get 5.5mm pitch, used on M56 fasteners), and gave very close... hobby-machinist https://hobby ...

  • My first lathe is a Frejoth/Central/Grizzly 12x36 Lathe The ...2020-09-16Lathe options - 12x36 up The Hobby-Machinist2020-05-20Enco 12x36 Lathe Rebuild (Picture Heavy!) The Hobby ...2018-04-12PM-1236-T 12″x36″ Ultra Precision Lathe-Good Machine? The ...2018-03-05See more results
  • Better lathe: Jet, Grizzly, Enco, or Precision Matthews ...

    2009-03-06  Better lathe: Jet, Grizzly, Enco, or Precision Matthews? Showing 1-15 of 15 messages. Better lathe: Jet, Grizzly, Enco, or Precision Matthews? [email protected]: 3/5/09 2:50 PM : I am replacing my old 13x36" 1200 pound 5914 with something newer. Mainly I do amateur gunsmithing. I cut threads, chambers, and make tooling. Is there an organized way to look at the variety of brands? Of

  • Jet Lathe parts - Diagram and Parts

    Need to repair your Jet Lathe? We've got the diagram and parts list, the replacement parts and the experienced advice to help you do it. Diagram and Parts List for Jet Lathe . Jet 321101AK_GHB-1340A Lathe Parts; Jet 321102AK_BDB-1340A Lathe Parts; Jet 321139_ZX Lathe Parts; Jet 321357A_BDB-1340A Lathe Parts ; Jet 321360A_BDB-1340A Lathe Parts; Jet 321376_BD-920W Lathe Parts; Jet

  • Jet 1336 PBD Lathe - The Home Machinist!

    2009-09-25  Beez, If I remember correctly the Jet is a belt driven lathe. I think Grizzly imported the same basic lathe as model G1003 around the early 80's. Grizz. has manuals and parts lists on line. Might be of some help. Good luck.

  • Need a little help locating parts for this lathe

    2011-12-31  The lathe is acuurate (atleast the one we have) but know it's limits. I have replaced sheared pins and grub screws, replaced chaffed wiring, etc. If it is a clone of the Burmingham they have an annoying habit of securing gears to shafts by placing grub screws parallel to the shaft, half in gear and half in the shaft. Needless to say BAD design ...

  • used grizzly lathe eBay

    10 product ratings - 5M710 GATES Polyflex V- Belt 9x20 Lathe Harbor Freight, Grizzly, Jet Belts. C $17.41. Top Rated Seller. Buy It Now. From United States +C $18.82 shipping . 78 sold. Rockwell Metal lathe 10" Crosslide Ballcrank Handle - Used. Pre-Owned. C $60.49. From United States. or Best Offer. Customs services and international tracking provided. ATLAS CRAFTSMAN LOGAN LATHE 5 INCH

  • used grizzly lathes eBay

    HF, Enco, Grizzly, Jet 9" x 20" Lathe Cross Feed Nut. C $68.09; Buy It Now; Calculate Shipping ; Only 3 left! 23 Sold. From United States; CHANGE GEAR RACK for 7" MINI LATHE, MINI METAL LATHE, Harbor Freight, Speedway . DARK RED - Handy Organizer for loose change gears! C $40.78; Buy It Now; Calculate Shipping ; From United States; New Atlas Craftsman South Bend Logan Grizzly

  • Grizzly G0516 Combo Lathe with Milling Attachment: Amazon ...

    Grizzly G0516 Combo Lathe with Milling Attachment: Amazon.ca: Tools Home Improvement. Skip to main content.ca Hello, Sign in. Account Lists Account Returns Orders. Try. Prime Cart. Tools Home Improvement . Go Search Hello Select your ...

  • Reviews: 2
  • Shop Tools and Machinery at Grizzly

    G0602 10" x 22" Benchtop Metal Lathe. The Grizzly G0602 Benchtop Metal Lathe is the perfect size for garage or workshop at 10" x 22". It features a 25mm spindle bore, 1-3/4"- 8 TPI MT#4 headstock and an 1-1/4" MT#3 tailstock. The 1 HP motor powers the spindle through six speeds from 150-2400 RPM. This lathe comes equipped with a full featured carriage and apron assemblies that provide super ...

  • Better lathe: Jet, Grizzly, Enco, or Precision Matthews ...

    2009-03-06  Better lathe: Jet, Grizzly, Enco, or Precision Matthews? Showing 1-15 of 15 messages. Better lathe: Jet, Grizzly, Enco, or Precision Matthews? [email protected]: 3/5/09 2:50 PM : I am replacing my old 13x36" 1200 pound 5914 with something newer. Mainly I do amateur gunsmithing. I cut threads, chambers, and make tooling. Is there an organized way to look at the variety of brands? Of

  • Metalworking Lathes for sale In Stock eBay

    5M730 GATES Polyflex V- Belt 9x20 Lathe Harbor Freight, Grizzly, Jet Belts. $12.95. 9 sold. 6" All-Metal Milling Lathe Machine Hand wheel Chrome Clad Rotating Handle. $14.95. 8 sold. Proops 1 - 2 Morse Taper Sleeve Adaptor Fully Hardened Ground Lathe Tool M0405 . $7.26. 7 sold. Custom Cut Replacement Drive Belt for South Bend 9 10 lathe. $17.95. 7 sold. Innovative Components Gn04---

  • SECTION 9: PARTS - Grizzly

    116 p4003g0116 gear shaft cover (l) gasket 153 p4003g0153 oil seal pd25 x 45 x 10 117 P4003G0117 BALL BEARING 6004-2RS 154 P4003G0154 GEAR 40T 118 P4003G0118 SET SCREW M8-1.25 X 6 155 P4003G0155 TAPER ROLLER BEARING HR 30211J NSK

  • Troubleshooting the Mini Lathe Variable Speed Drive

    The premier source of parts and accessories for mini lathes and mini mills. Troubleshooting the Mini Lathe Variable Speed Drive There are several common types of failure that occur on the mini lathe's variable speed drive. Find the symptoms your lathe exhibits, and follow the steps to diagnose the problem. This document covers the following mini lathes: Grizzly Industrial model G8688 Harbor ...

  • Jet 1336 PBD Lathe - The Home Machinist!

    2009-09-25  Beez, If I remember correctly the Jet is a belt driven lathe. I think Grizzly imported the same basic lathe as model G1003 around the early 80's. Grizz. has manuals and parts lists on line. Might be of some help. Good luck.

  • JET® Wood Lathes Woodturning Machines

    Take your turning projects to the next level with a highly capable JET Lathe. Built with cast iron for stability, and to limit vibration, JET Lathes are available with variable speed and positive locking indexing to handle whatever you throw at them! Narrow results Style (Type) Benchtop (1) Floorstanding Model (1) Motor Power (HP) Motor Power (HP) Our motors are rated in actual horsepower ...

  • Need a little help locating parts for this lathe

    2011-12-31  The lathe is acuurate (atleast the one we have) but know it's limits. I have replaced sheared pins and grub screws, replaced chaffed wiring, etc. If it is a clone of the Burmingham they have an annoying habit of securing gears to shafts by placing grub screws parallel to the shaft, half in gear and half in the shaft. Needless to say BAD design ...

  • Lathe fix. Has anyone ever had lathe gears made for ...

    2013-02-13  Looking at maybe buying a used Grizzly 12x37 belt drive gap bed lathe- model G1003. Apparently this machine, being from the late '80s and not having a cam lock spindle, used the back gear to lock the spindle for chuck removal. This would lead to gear teeth being broken when the chuck would not unscrew and too much force was used. Well, this guy did it to his machine too and has not been

  • GRIZZLY G0554Z OWNER'S MANUAL Pdf Download ManualsLib

    Lathe Grizzly G1003 Instruction Manual. 12" x 37" gap-bed metal lathe (47 pages) Lathe Grizzly G0776 Owner's Manual. 13 inch x 40 inch gunsmith lathe w/dro. for models mufactured since 7/14 (132 pages) Lathe Grizzly G0602 Owner's Manual. 10" x 22" benchtop lathe (61 pages) Lathe Grizzly G4003G Owner's Manual. Gunsmith's lathe (72 pages) Lathe Grizzly G9972Z Owner's Manual. 11" x 26" light

  • Jet 1336 PBD Lathe - The Home Machinist!

    2009-09-25  Beez, If I remember correctly the Jet is a belt driven lathe. I think Grizzly imported the same basic lathe as model G1003 around the early 80's. Grizz. has manuals and parts lists on line. Might be of some help. Good luck.

  • Troubleshooting the Mini Lathe Variable Speed Drive

    The premier source of parts and accessories for mini lathes and mini mills. Troubleshooting the Mini Lathe Variable Speed Drive There are several common types of failure that occur on the mini lathe's variable speed drive. Find the symptoms your lathe exhibits, and follow the steps to diagnose the problem. This document covers the following mini lathes: Grizzly Industrial model G8688 Harbor ...

  • Jet Lathe parts - Diagram and Parts

    Need to repair your Jet Lathe? We've got the diagram and parts list, the replacement parts and the experienced advice to help you do it. Diagram and Parts List for Jet Lathe . Jet 321101AK_GHB-1340A Lathe Parts; Jet 321102AK_BDB-1340A Lathe Parts; Jet 321139_ZX Lathe Parts; Jet 321357A_BDB-1340A Lathe Parts ; Jet 321360A_BDB-1340A Lathe Parts; Jet 321376_BD-920W Lathe Parts; Jet

  • Best Metal Lathe Reviews Metal Lathe Machines Worth Buying

    2018-03-03  So all the specs make it a similar metal lathe to the Grizzly G0602 and it’s similar in the way it operates. The 5” 3-jaw chuck and faceplates are made really easy to change by using a lock plate with slotted oversized holes, allowing the studs to pass through easily by simply turning it counter clockwise. The four-way turret tool post also saves time by allowing you to mount several tools ...

  • Is there a bump in quality between the Chinese Grizzly ...

    2005-07-19  The grizzly lathe weighs in at 1609lbs, while the Jet is 5180lbs- The Jet has a 7 1/2 hp motor, versus the wimpy 3hp on the Grizzly, and every part is commensurately larger and heftier- in fact, just about every one of Joe's criticisms has been addressed in these Jet lathes, and I have been running mine for 4 years now, with no problems, and I am quite happy with it.

  • Grizzly vs jet - The Home Machinist!

    2004-06-01  With the exception of the M39 x 4 spindle on the Grizzly, there are not any other differences in the Jet, Grizzly and the half dozen other vendor's 9 x 20 lathes (see the Yahoo group). In spite of the bad press, the Harbor Freight for $599 is probably the best deal of the lot. The quality is just as good as the Jet or Grizzly for several ...

  • Grizzly G4003 12 by 36" Gear-Head Cam Lock Spindle Gap Bed ...

    An exceptional valued metal lathe. A gear-head spindle lets you select speeds without having to fuss with belts or pulleys. Shifting gears is as easy as switching a couple of front-mounted levers. Quick change gearbox makes thread cutting selection fast and efficient. Outstanding quality at a very reasonable price. Product information Technical Details. Manufacturer Grizzly Part Number G4003 ...

  • Reviews: 7
  • Grizzly vs jet - The Home Machinist!

    2004-06-01  With the exception of the M39 x 4 spindle on the Grizzly, there are not any other differences in the Jet, Grizzly and the half dozen other vendor's 9 x 20 lathes (see the Yahoo group). In spite of the bad press, the Harbor Freight for $599 is probably the best deal of the lot. The quality is just as good as the Jet or Grizzly for several ...

  • Grizzly G4003 12 by 36" Gear-Head Cam Lock Spindle Gap Bed ...

    An exceptional valued metal lathe. A gear-head spindle lets you select speeds without having to fuss with belts or pulleys. Shifting gears is as easy as switching a couple of front-mounted levers. Quick change gearbox makes thread cutting selection fast and efficient. Outstanding quality at a very reasonable price. Product information Technical Details. Manufacturer Grizzly Part Number G4003 ...

  • Reviews: 7
  • Enco Lathe Deals - Hot Products on GetItNext!

    Buy for less: Enco Lathe. Find deals faster with getitnext. Hot Products!

  • Primary Gearing (Back Gears) for the Grizzly 9x20 Lathe

    The original version of this modification was fabricated for a Grizzly G1550 lathe. The 1550 was a version of the Asian 9x20 that has had considerable touch up work done by the distributor before marketing. For all intents and purposes of this description, it is identical to the plethora of imports that are sold under a variety of names. Jet, ENCO, and Harbor Freight are just a few of the ...

  • LATHE ACCESSORIES - Oneway Tool Rests - The Woodturning

    Oneway Lathe tool rest - 6" Wide, 1" Post. This tool rest is designed to work with the banjo (tool rest base) so that you can get very close to the front and back side of turnings. Oneway 14" tool rests are for large lathes and are made from ductile iron...

  • Jet Tool Factory Parts - Mike's Tools

    Jet Tool Factory Parts Jet factory tool parts. Free parts list and owner's manuals are available for download. If there is no image for the part it is not in stock. Find the part number from the Jet parts list on the left side of my website and enter Part Number in the search box on the left side. Do not use the reference number off of the ...

  • Serious Reeves drive knowledge needed American ...

    2016-08-03  Jet 1236 lathe is operating on 3 lowest speeds only, second time this has happened (the last time, it was stuck on lowest 2 speeds). At that time (last week): The spindle-side sheave that's supposed to move with the speed-change bracket was not moving (motor-mounted pulley seems OK) A 1236-knowledgeable buddy came to rescue, took the pulleys and speed bracket off, we cleaned

  • GHB-BDB-1340A Parts List

    JET P.O. BOX 1349 Phone: 253-351-6000 WMH Tool Group Auburn, WA 98071-1349 Fax: 1-800-274-6840 jettools e-mail [email protected] M-321357A 06/02

  • Jet 1024P - Construction and Build Yuriy's Toys

    As far as the threading is concerned, Jet’s 1024 lathe can cut a good range of metric and inch tread sizes. The manual states that using two change leavers, one can select one of the 40 inch treads ranging from 4 to 112 TPI. With installed metric gears, the lathe offers metric threads from 0.35 to 4.5 per mm in 24 steps. In comparison, 9x20 can cut 27 inch and 11 metric threads, 8-56 TPI and ...

  • Benchtest.Com - Workshop - South Bend 9 inch Lathe

    The reverse gear is on a shaft that must be "popped in" next to a single straight "banjo" rather than the later "tumble reverse" and "V" shaped banjo. The cross slide has a short tail section that doesn't cover the cross-feed screw all of the way. There are no "way wipers" included on the carriage. This is a shame and is about the only thing I might consider modifying to the later style, but ...